TLB

1) CCI SHOULD BE in an established trend above 100 line.

2) CCI is preferred to be in a trend above the 200 line.

3) Chop zone indicator is NOT used.

4) Sidewinder in NOT used.

5) LSMA is NOT used.

6) Trend Line Break is the trigger.

7) The closer the actual trend-line break is to the Zero Line the better.

TONY TRADE

1) CCI SHOULD BE in an established trend (at least 6 bars or more).

2) CCI prints a minimum 4 bars on the other side of Zero Line (against the trend).

3) CCI SHOULD NOT print more than 9 bars on the other side of Zero Line.

4) NOT A SINGLE BAR on the other side should CROSS the 100 line.

5) Look for TLB now. Then the crossing of the Zero line triggers the trade.

6) TLB alone may also trigger the trade. This may be termed an aggressive trade.

7) LSMA, CZI, SI are NOT used in this trade.

 

GB100 (A ZLR that has gone too far)

1) CCI SHOULD BE in an established trend (at least 6 bars or more).

2) CCI goes to the other side of the Zero Line.

3) CCI crosses the 100 line on the other side.

4) CCI SHOULD NOT print more than 6 bars on the other side.

5) TLB back towards the original trend AND crossing the 100 line is the trigger.

6) CZI SHOULD BE Blue/Brown IN AGREEMENT with the ORIGINAL TREND.

7) LSMA and SI are NOT used.

Against the trend patterns

FAMIR

1) It is a FAILED ZLR.

2) LSMA SHOULD BE green for upside FAMIR and red for downside FAMIR.

3) The FAMIR SHOULD form between the +50 and -50 lines.

4) Completion of the Z shape at 20secs to bar close is the trigger.

5) CZI is NOT used.

6) SI is NOT used.

VEGAS TRADE

1) CCI MUST cross 200 line in the established direction of the trend.

2) CCI then reverses and MUST cross the 100 line.

3) CCI starts rounding after making a swing low/high.

4) CCI rounding can look like a cup OR peaks and valleys.

5) CCI rounding of between 3 and 10 bars is required.

6) CCI may or may not cross the 100 line during the rounding period.

7) CCI crossing of the swing low/high after the rounding is the trigger.

8) LSMA SHOULD BE green for upside move and red for downside move.

9) CZI and SI are NOT used.

GHOST

1) CCI must make 3 peaks encapsulating 2 valleys.

2) The 2 valleys are connected by drawing a line.

3) This line is also extended to the right (in the future).

4) CCI violation of this line for a 3rd time triggers the trade.

5) CZI, SI, LSMA are NOT used.

6) GHOST can form in any direction with any slant.

7) Woodie believes the slant towards the Zero Line is preferable.

8) A Ghost is a Ghost is a Ghost.